Landline / GSM Alarm System with IP camera

S4 Combo Vid Secual

ES-SVG-50x50-GENERAL -Landline
ES-SVG-50x50-GENERAL -GSM / App
ES-SVG-50x50-GENERAL -Easy setup
ES-SVG-50x50-GENERAL -Accessories50
ES-SVG-50x50-GENERAL -Wireless
ES-SVG-50x50-GENERALSiren
ES-SVG-50x50-GENERAL -RFID Tag

Protecting your home when you’re away has never been this easy with wireless alarm system. Stay in contact with your home at all time: the whole alarm system can be controlled from distance on your phone, wherever you are. Also monitor your home from distance directly on your phone or on your computer with the included HD camera.

Easy programming by LCD
Installed in a few minutes
Wireless connection

Specifications

  • Works with your classic landline or adsl line
  • GSM frequency : 850 / 900 / 1800 / 1900MH
  • Accessories supported : up to 30 remote controls; 50 wireless accessories; 50 RFID tags
  • Store up to 5 numbers for SMS notifications (including one for RFID tag notifications);  5 numbers for phone call alerts
  • Recordable voice memo

Features

  • Arm / disarm the system by SMS, phone call, or application (on iOS or Android)
  • Can be disarmed by RFID tag | RFID tags can be renamed
  • Built-in siren (100dB) and call function from the panel
  • SMS alerts for power failure, power recovery and low battery
  • Audio surveillance from distance
  • AC adaptor : Input: AC 110-240V / 50-60Hz | Output: DC 12V / 500mA
  • Lithium backup batteries : 3.7V / 800mAh x 2 (up to 8 hours battery backup)
  • Size : 191 x 132 x 28 mm | Weight : 320 gr

Camera features

  • Image Sensor: 1/3” CMOS
  • Video Resolution: 1280x720p (H.264)
  • Night vision: 8 LEDs  (up to 8m)
  • Focal: ≥3 mm | Aperture: F2.0
  • Vision Scope: Horizontal: 90° / Vertical: 45° / Diagonal: 78°
  • Microphone: Built-in, with noise reduction
  • Power Supply: 5V 1A, 110~240V/ DC Jack
Where to buy?

Problem solvers

What is the code by default of my alarm system?

By default, the passcode of the S3b control panel is 1234. However, we strongly advise you to change this immediately during the initial set up! 

Read more

I've deleted the PIN code from my SIM card, but the panel doesn't make a network connection?

Turn off the system by sliding the button to 'Off'. Then the panel can be switched on again and the connection should be made.

Read more
Get answers to all common questions